Labomatic - Fraction collection

LABOCOL Vario-2000 series
LABOCOL Vario-2000 series  
Application
- The LABOCOL Vario-2000 series: Superior fraction collectors with a program to fullfil all your application needs. An open system with an unlimited number of fractions, columns and vial sizes with a rack to suit every application.
- With their small proportions and optimal space-saving design, the LABOCOL Vario-2000 instruments are at home with even the least amount of space. Compact and versatile, the Vario-2000 range is ideal for research and development, educational institutions and production industries.
- The models differ in their base size and number of fractions.
- The series consists of the LABOCOL Vario-2000, Vario-2000 Plus and Vario-2000 Ultra.
Special featuers
- Small size
Large number of fractions
- Removable XY system
- Freely programmable XY system
- Touch screen panel serves as the programming console
- The programming console can be positioned independent of the instrument
- Programming of the fractionation time or pump output volume
- Automatic rack recognition
- Flexible capacity
- Aggressive solvents pose no problems as the housing and vial racks are made of stainless steel
- Compact, optimal use of space
- Unique tubing for solvents
- Built-in flow interruption valve and delay/waste valve
- Up to 625 fractions with a volume of up to 500 ml
- Drain racks for collecting up to 100 fractions independent of volume
- Line or meander operation
- Multiple chromatography, simultaneous dosing of up to 20 columns fractionations
- External inlets and outles such as:
RS 232, Home, Start/Stop, Hold/Continue, Step
Fraction marking and Shutoff of connected instruments etc.
- Range of different vials from 3.6 - 500 ml
 
 

Vario-2000    

 
LABOCOL Vario-2000 Plus
 
LABOCOL FS-3000 Fraction collector
LABOCOL FS-3000 Fraction collector module
from the LH-3000 Liquid-Handling System Series		  
Application

-

 An open system with an unlimited number of fractions, columns and vial sizes with a rack to suit every application. The instrument size is determined by the customer's application, whereby the movement of the XY systems can be up to 2800 mm wide and 670 mm deep.
Special features
- The size can be adapted to suit your requirements
- More than 1000 different sizes and models can be combined
-
Movement:   Width   x-axis up to 3000 mm
  Depth   y-axis up to 750 mm
- Freely programmable XYZ system
- Can be extended to make a 2-axis device
Aliquot extraction of the fraction in mikrotiter plates
Automatic peak pooling
- Freely programmable sequence of steps
- There is no dead volume as the flow interruption valve and the waste valve are mounted directly on the Y-arm
- Automatic rack recognition
- Infinite number of fractions via the repeat function and the replacement of filled racks
- Continuos operation
- Unlimited fraction volume due to numerous draining racks
- Touchscreen program and parameter display
　
LABOCOL Roto-100
LABOCOL Roto-100  
Applications

-

 Compact, solvent resistant fraction collector with exchangeable racks and versatile utilization possibilities. Requires little place. Ideal for research and development, as well as for pilot plant or production.
Special features
- Inclined display with LCD-indication of the preset program and of the current status
- Universal use through different racks
- Compact construction
- Collection of larger fractions in any desired vessels
- Control of externally connected instruments or valves
- Bar code scanning of the individual positions of the tubes, can also be modified subsequently
- Time control of 1 - 999 minutes or seconds
- External inputs: time-reset, manual, home hold, run/stop
- External outputs: marker, intermediate disconnection, final disconnection (110/220/24 volt, currentless contact) marker for final disconnection
- The actual program can be overwritten directly and implemented immediately
- Home-functions allow to start repeated runs at the same position or vial; can be connected to automatic sample injection systems
- Preset fraction number and preset fraction time always displayed
Available racks
- Micro rack
For use with 80 micro vials
(OD 11 mm, length 80 mm, volume 7.5 ml)
- Standard rack
For use with 80 standard vials
(OD 18 mm, length 180 mm, volume 36 ml)
- Preparative/large volume racks
For use with 20 preparative vials
(OD 36 mm, length 170 mm, volume 140 ml) or for use with 20 large volume vials (OD 36 mm, length 285 mm, volume 240 ml)
- 40-fold distribution ring
Allows the collection of big quantities in any desired vessel. The distribution ring is made of polyethylene. The 40 connections are adapted to tubing of ID 6-10 mm.
　
LABOCOL EX-24
LABOCOL EX-24
pneumatic fraction collector		  
Applications

-

 Compact, solvent resistant, pneumatically controlled fraction collector for explosion proof area. Use for rates up to 8.5 l/min
Special features
- This fraction collector, designed for use in explosion proof rooms, is air controlled (2.5 - 3.5 bar).
- Its use is maintenance-free. It is made out of solvent resistant materials and can fraction in up to 24 different containers.
- The basic instrument of the LABOCOL EX-24 consists of a cylindrical aluminum housing and compressed-air driven drive. It has a connection for the control line to the control housing.
- The control housing supplied with the fraction collector is connected to the basic instrument through the control line (pressure tube).
- A timer that allows control by time intervals of 3 seconds up to 100 minutes
- Distribution plates (made out of PP, PE or PTFE) for 24 connections
- Tube nipple diameters (6 or 12 mm/flow rate: 1.5 or 8.5 l/min).
　


台北縣新店市安興路7-1號6樓
TEL:02-2211-3939  FAX:02-2211-5522
http://www.vercopak.com.tw
E-mail:vercopak@ms5.hinet.net